BSP is the platform that records, reports and acts on live data from your building's systems — wirelessly, over LoRaWAN. Today it protects your water. Tomorrow, much more.
Each BSP system is purpose-built and independently branded — deployed on its own or together, all reporting into a single monitoring platform.
Probes and leak-detection tape monitor sinks, basins, showers, tea points and every critical area — pinpointing where and when water appears.
Solenoid valves close the water supply automatically the moment a leak is found — controlled wirelessly from the platform until the issue is resolved.
Continuous temperature and water-condition monitoring with automated reporting — a separate system to support Legionella risk management and compliance.
Traditional leak detection wires every sensor back to a fixed control panel. BSP doesn't. Each device is battery-powered and talks over LoRaWAN radio straight to a single small gateway — and on to the platform. Long range, low power, and nothing to wire in.
Battery-powered sensors placed at every critical point — under sinks, behind risers, across plant-room floors.
Receives radio signals from devices across the building and relays them securely to the platform.
Live status, instant alerts and full history — viewable anywhere, and ready to trigger automated shut-off.
Every sensor cabled back to a fixed central control panel — expensive to install, disruptive to retrofit, and locked to one location.
Battery devices, LoRaWAN radio, one small gateway. No central panel and no cabling between devices — so it fits anywhere and retrofits with zero mess.
Undetected leaks cause some of the most expensive and disruptive damage a building can suffer. BSP turns that risk into something you can see, manage and stop.
Continuous monitoring at every vulnerable point means a leak is flagged in real time — not discovered after the ceiling has come down.
Every device reports its own location, so you go straight to the source instead of searching a whole building under pressure.
Pair detection with automated shut-off and the water closes itself off — limiting damage before anyone is even on site.
Book a no-obligation survey and we'll show you where BSP monitoring would protect your building — new build, fit-out or existing.